Security Outdoor Solar Motion Sensor Light 10W 20W COB LED is a high-quality lighting product powered by Solar Power that does not require any electric wires or additional sources of energy. The Chip on Board LED (COB LED) Solar Sensor Light is designed for outdoor areas, different weather and climate conditions and has a high protection rating. The product equipped with PIR Motion Sensor with a sensitivity range between 1-10m that turns the light up when detecting a movement or presence of people within the distance. In addition, the built-in Motion PIR Sensor integrated with an automatic light sensor that activates Solar Light at night and put it into the charging mode during the day. The Motion Sensor makes the Solar LED light an efficient and intelligent security device for any residential and commercial property.
The current model of Solar Sensor light has energy-efficient Solar Panel that absorbs the sunlight during the day and converts it into the energy which stores at rechargeable Li-Ion battery to power the light up at night. Different Adjustable operation modes allow changing and extending the lighting performance if needed.
The solar motion sensor light is a DIY lighting product with a universal hardware mount for easy installation. The self-contained water- and weatherproof lighting device does not require wires and can be easily installed anywhere the sun shines including the wall or fence of the home, garage, garden, shed, in the warehouse, basement etc.
Solar Light is energy efficient, completely safe and environment-friendly. Moreover, it is a low-maintenance and cost-efficient Solar Product that provides outstanding performance without additional maintenance.
Product Features:
- Security Outdoor Solar Motion Sensor Light 10W 20W COB LED is an energy-efficient and grid-independent solar powered light.
- Bright performance delivered by 10W/ 20W COB LED bulb with reflective intensifier reaches 500lm/ 1200lm.
- Solar Panel has a high Energy Conversion rate to shorten the charging time of Powerful Lithium 2600mAh/ 5200mAh battery for continuous performance.
- Security PIR Motions Sensor for movement detection.
- Improved Intelligent Security Features including extensive Motion Detection Range up to 8-10m.
- Adjustable Sensitivity, Lighting time and Automatic light control:
- SENS (Motion Sensitivity): light can be activated at a longer distance meaning higher security, or closer distance to avoid triggering the sensor from too far distance.
- TIME (Light Time Delay): lighting will stay on for the desired time (between 5-360 seconds);
- DAILY LIGHT (Daylight Sensitivity): ambient luminance set up the point
- Solar panel separated from the light head with 3m cord to increase the sunlight exposure and provide more flexibility in installation and operating environment including indoor and outdoor application.
- Fully automated operation process with a Special built-in Light-control System that activates the light automatically in the dark and deactivates it during the daytime or bright light conditions.
- Durable Waterproof and Heatproof design: lightweight aluminium and toughened glass with enhanced weather resistance.
- Completely safe, easy to install, set up and operate. Can be fixed to almost any surface including bricks, stucco, wood, metal, etc.
- Zero maintenance costs. No electric wires, extra costs for electricity bills and professional electrician installation are required.
Application:
The universal outdoor Solar Motion Sensor Light 10W 20W COB LED delivers reliable, long-lasting lighting and is ideal for maintaining casual or emergency lighting around the house, garage, garden, porches, patios, decks, balconies & verandas, side and backyard, aisles, driveway, stairs, entryway, path, fence etc.
- Great as a Security Light for an outdoor and indoor property as a perimeter or security light.
- Suitable for commercial and business applications including building sites, hotels, halls, parking, garden, construction building, etc.
Installation & Operation:
The Solar Panel should be installed in a well-lit area to receive maximum straight sunlight during the daytime. Any cover that shades the Solar Panel will affect its ability to absorb sunlight and, as a result, decrease a device’s performance.
If the Flood light battery goes completely flat, it will need 8-10 hours of full sun to recharge it fully via the Solar Panel.
IMPORTANT: WARNING!
To ensure proper installation and avoid potential hazards, please follow these instructions carefully:
- Correct Positioning: The floodlight must be installed strictly with the PIR Motion Sensor, cable outlets and switch facing downward towards the ground.
- Risk of Damage: Incorrect installation may expose the product to an increased risk of water leakage or vapour entering the lamp, which can cause failure.
- Warranty Notice: Improper installation will void the warranty.
Package Included:
1 x Solar Sensor Light with Mount hardware.
1 x Solar Panel with Mount hardware.
1 x Fitting kit.
General maintenance tips for solar lighting products:
- Solar Panel should be installed in a well-lit area where it can receive maximum straight sunlight during daytime. Any cover that shades the Solar Panel will affect its ability to absorb sunlight and as a result, decrease a device’s performance.
- Clean the surface of the Solar Panel with a soft, slightly moistened cloth with soap and water or a dry brush only. Do not use any corrosive cleaning liquids or chemicals since this may damage the housing surface or impair future operation.
- Keep the Solar Panel free of dirt, debris and snow otherwise the battery will not charge properly or might also shorten battery life or cause a malfunction.
- It is recommended to place the product under the sun for recharging even it is not being used to prevent from a dead battery and maximize its life.
- In a case when the product is not being used for a long time, charge it for at least 10 hours by the sun before use.
- Please, keep the product away from the fire to prevent explosion hazard.
Learn more
Leave a review