Bright 60 LED Security Solar Motion Sensor Wall Light Remote Control

Product Features:

- Outdoor Bright 60 LED Security Solar Motion Sensor Wall Light with Remote Controller is an energy-efficient and grid-independent lighting products powered by Solar Energy.

- Improved Solar Panel with high Energy Conversion rate 18.2% to shorten the charging time.

- Bright illumination delivered by 60 LED SMD2835 Chip.

- Powerful Lithium Iron Phosphate Battery LiFePO4 5000mAh with stretched performance life provides longer lighting.  

- Multiple operational setups including Manual switch, Auto Light Control and Remote Control Pad with 2-3m distance range. 

- FIVE Operation Modes including energy-saving DIM, Motion Sensor only and intelligent performance adjustment based on the battery charge remaining.  

- Advanced security features including Motion Sensor with 120°angle and extended 5-12m range. 

- Fully automated operation process with Special built-in Light-control System for day/ night mode detection that turns the light on at night and off during the day.

- Durable and lightweight shell. Waterproof and heatproof design: enhanced IP65 water and weather resistance.

- Completely safe, easy to install, setup and operate. 

- No maintenance or electricity cost. User-friendly design, no wiring or any professional installation required. 

Operation Modes:

Mode 1: Constant energy-saving DIM + Full brightness on for 15s when motion is detected. 

Mode 2: Constant off + Full brightness on for 15s when motion is detected.

Mode 3: Automatic On at night for 5 hours at 60% of brightness to prolong the performance.

Mode 4: Intelligent adjustment. The light will operate in Mode 3 while there is more than 60% of charge left in the battery. Once the charge will drop below 60% the light will automatically go into the power-saving mode. Three indicators will be on at the same time.

Mode 5: Emergency lighting. Strong full brightness On for 1 hour. After that, the light will automatically turn off. Three indicators on the side of the lamp will stay on and flash at the same time.

Application: 

The Bright 60 LED Security Solar Motion Sensor Wall Light with Remote Controller delivers reliable lighting and is ideal for maintain casual, emergency or security lighting around the house, porch, garage, driveway, garden, patios, side and backyard, aisles, stairs, entryway, path, fence etc. 

- Security lighting for any kind of premises and real estate.

Package Included:

1 x Solar Wall Light;

1 x Remote Controller;

1 x Installation Kit.

Important Information

1. As the power of the Solar Panel is depended on the sunlight, the LED lighting time and brightness is affected by weather, seasons, places, etc.

2. Make sure that the Solar Panel is not sheltered from the sun that would prevent the battery from proper charging.

3. The battery can only be charged when the switch is turned ON.

Solar-powered Products Maintenance:

- Solar Panel of Bright 60 LED Security Solar Motion Sensor Wall Light with Remote Controller should be installed in a well-lit area where it can receive maximum straight sunlight during daytime. Any cover that shades the Solar Panel will affect its ability to absorb sunlight and as a result, decrease a device’s performance.

- Clean the surface of the Solar Panel with a soft, slightly moistened cloth with soap and water or a dry brush only. Do not use any corrosive cleaning liquids or chemicals since this may damage the housing surface or impair future operation.

- Keep the Solar Panel free of dirt, debris and snow otherwise the battery will not charge properly or might also shorten battery life or cause a malfunction.

- It is recommended to place the product under the sun for recharging even it is not being used to prevent from a dead battery and maximize its life. 

- In a case when the product is not being used for a long time, charge it for at least 10 hours by the sun before use. 

- Please, keep the product away from the fire to prevent explosion hazard.