- Outdoor Security Solar Flame Light is an Energy-efficient lighting product powered by Solar Energy turns on automatically at dusk and can be placed anywhere. Improved Solar Panel with high Energy Conversion rate shortens the charging time and increase performance duration.
- Amazing Realistic eye-catching Flame Effect provided by 60 LED bulbs to create a safe alternative to the real fire flame. LEDs in the light cast a safe, soft, mood-enhancing glow at night.
- Stylish Design with gentle Warm Glowing: This solar wall light has a set of warm LEDs which supplies a soft and comfortable feeling like what you would expect from a real fire flame. It's designed to add value to the atmosphere discreetly.
- Security Features delivered by PIR Motion Sensor in combination with additional 12 LED lights.
- Long Working Time supplied by a built-in high capacity rechargeable Li-ion battery 1200mAh - up to 8 hours lighting after fully charged.
- Fully automated operation process with Special built-in Light-control System for day/ night mode detection to control switch between On and Off.
- Ready for hard Australian weather conditions. Waterproof and Heatproof design: enhanced IP65 water and weather resistance.
- Completely safe, easy to install, setup and operate. User-friendly design, no wiring or any professional installation required.
- No maintenance or electricity cost. No pollution. No radiation. Protect the environment and save energy!
The Outdoor Security Solar Flame Light with motion sensor delivers reliable long-lasting lighting and is ideal for outdoor emergency and security lighting with decoration in mind around the house, garden, yard, deck, patios, side and backyard, aisles, stairs, pathways, etc.
- Great as a decoration outdoor light walls, fences etc.
- Suitable for outdoor commercial purposes, festivals, restaurants and cafes decoration.
1 x Security Solar Flame Light.
1 x Installation Package.
1 x User manual.
1. Please use the key pin included in the package to unlock/turn on the solar light.
2. Keep the device away from fire and avert the product immersed in water.
3. Please make sure the solar panel gets the sunlight directly without any shelter or glass.
4. Both the working time and charging time will be influenced by weather condition.
5. The LED light should be charged about two sunny days in turned on mode before use.
General maintenance tips about how to improve Solar Panel’s life and efficiency of Solar Powered Products like Solar Flame Light:
- Solar Panel should be installed in a well-lit area where it can receive maximum straight sunlight during daytime. Any cover that shades the Solar Panel will affect its ability to absorb sunlight and as a result decrease a device’s performance.
- Clean the surface of the Solar Panel with a soft, slightly moistened cloth with soap and water or a dry brush only. Do not use any corrosive cleaning liquids or chemicals since this may damage the housing surface or impair future operation.
- Keep the Solar Panel free of dirt, debris and snow otherwise the battery will not charge properly or might also shorten battery life or cause a malfunction.
- It is recommended to place the product under the sun for recharging even it is not being used to prevent from a dead battery and maximize its life.
- In a case when the product is not being used for a long time, charge it for at least 10 hours by the sun before use.
- Please, keep the product away from the fire to prevent explosion hazard.
* SPECIAL OFFER: discount applies automatically at the check-out process.